Support

Of course.  When recording with your DAW, make sure you’re only recording onto a mono track.  If you’re recording onto a stereo track, you will only be recording onto the left channel of the microphone.

The three switches on the microphone are for enabling/disabling the hi-pass filter, changing the microphone’s polar pattern, and enabling/disabling the -10dB pad.

A hi-pass filter, also known as a “lo-cut” filter, is used to bring down the lower frequencies of a signal in order to a remove any excessive low-frequencies that may “muddy” up a recording, including light wind noise.  The C03U rolls off frequencies below 100Hz at 12dB per octave.